Transmitter Mezzanine (plugged on the FED)
This page will explain you how to reprogram the FPGA on the mezzanine card.
To do it, you have to follow the explaination below:
Download the update from the table below
You unscrew the Merger Mezzanine card plugged on the Generic III board.
You plug instead the Transmitter Mezzanine
The "BYPASS_JTAG" switch (Generic III top-right, under JTAG connector) put 1 and 2 'OFF' left site.
Switch 'OFF' PC ,you plug Generic III on the PC (running Linux).
You go to the following WEB page : http://cmsdoc.cern.ch/~cschwick/software/documentation/GIII-JTAG/index.html
You execute the instructions of this page with the file that you download on this page.
If you have a problem contact us.
If everything is OK , switch off the PC. Reinstall the Merger Mezzanine card on the Generic III (with screw).
If you have any question contact us dominique gigi (hardware) christoph schwick (software).
Good luck
6 March 2003
Date | JBC File | Compilation version | Comments |
5 March 2003 | 05032003.jbc | not implemented | problem , wrong polarity for LDOWN signal |
6 January 2004 | Mez_T_060104.jbc | not implemented | generate pattern to test the lvds link |
07 Feb.2006 | Mez_T_070206.jbc | not implemented | Version with CRC generated inside mezzanine |